Structural Fire Suits

AS/NZS Standard Structural Level 2 Fire Suit

$1.00

Where to Buy
Material
Outer Shell: Series FX10 Kermal™ Fabric 98% aramid / 2% antistatic; 220g/m2 as a double faced weave, with the UV sensitive pararimid woven into the back
Moisture Barrier: Series FL12 Moisture Barrier Fabric 100% aramid non-woven laminated on ePTFE membrane 200g/m2.
Thermal Lining: Series FT10 Thermal Lining Fabric 98% aramid / 2% antistatic; 90g/m2

Our aviation structural fire suits are a combination of high strength, breathability and lightweight performance. Features include detachable liners, articulated shoulder, elbow and knee movement, excellent break open properties and multiple fit adjusters giving a fit for purpose garment every time. The perfect blend of high performance fabrics and design, improving your wearer experience when you are in those critical situations.


JACKET FEATURES

  • Series FX10 Kermal™ Fabric 98% aramid / 2% antistatic; 220g/m2 as a double faced weave, with the UV sensitive pararimid woven into the back.
  • As ensemble, meeting EN 469:2005 and AS/NZS 4967:2009 garment requirements for structural firefighting.
  • Contrast Silver Yellow 3M® segmented triple trim 75mm reflective FR tape in double body loop and sleeve loop configuration.
  • Pocket configuration double front lower pockets, double upper radio pockets on each chest with mic tabs above, pocket under zip flap.
  • Pleated ergonomic shoulder finish, additional underarm panels and articulated arm design.
  • Jacket cuffing FR aramid rib knit with thumb loops.
  • Additional Velcro for neck flap double adjusting style.
  • Made in New Zealand

DETACHABLE MOISTURE BARRIER & THERMAL LINING FEATURES

  • Series FL12 Moisture Barrier Fabric 100% aramid non-woven laminated on ePTFE membrane 200g/m2
  • Series FT10 Thermal Lining Fabric 98% aramid / 2% antistatic; 90g/m2
  • As ensemble, meeting EN 469:2005 and AS/NZS 4967:2009 garment requirements for structural firefighting.
  • Liner pocket configuration to be one lower pocket on thermal lining.
  • Water vapour resistance (Breathability) rating of RET 13.7, Test method ISO 11092: 2014 (Ret) with confidence limit ± 8%.
  • Made in New Zealand

TROUSER FEATURES

  • Series FX10 Fabric 98% aramid / 2% antistatic; 220g/m2
  • As ensemble, meeting EN 469:2005 and AS/NZS 4967:2009 garment requirements for structural firefighting.
  • Contrast Silver Yellow 3M® segmented triple trim 75mm reflective FR tape in single loop configuration.
  • Four stripe FR elastic trouser belt with single pull adjustable buckle.
  • Double reinforced webbing brace attachment points on trouser.
  • FR hook and loop front fly with additional fixing metal dome.
  • Double webbing pull handles on trouser for quickly pulling up garment.
  • Inbuilt Nomex foam kneepads with pleated expansion knee design.
  • Double trouser leg pocket design
  • Made in New Zealand

OUTER SHELL FABRIC ADVANTAGES

The outer shell of the Styx Mill 111X Level 2 Fire Fighting suit is unique in the fact that it is woven with a double weave of a blend of Meta and Para aramid fibres with a percentage of antistatic. This combination gives low-weight, high strength, protection and breathability properties, in particular achieving an outstanding breathability rating of RET 13.7

  • Superior UV performance giving a longer fabric life. The UV sensitive para-aramid fibres are woven in to the back of the fabric, under the more UV resistant meta-aramid front. This protects them from UV degradation and gives a much longer fabric life in UV exposure.
  • Excellent fabric colour retention. The meta-aramid fabric front is spun dyed. This significantly improves light fastness, reduces UV degradation and maintains the colour integrity.
  • Lightweight thermal insulation & heat protection. The outer shell is a double sided cord/rib construction giving the fabric a slight “corrugated” appearance, a major advantage in reducing fabric mass weight to 205gsm. This design allows air to be trapped in between the face and inner sides of the double weave, improving thermal insulation, heat protection and breathability.

MOISTURE THERMAL BARRIER “EOLINER” ADVANTAGES

The moisture thermal barrier is a rib weave of large diameter recycled aramid fibre, as a weft insert to a non-woven meta-para-aramid blend. This fabric is then laminated with an E-PTFE membrane, giving a layer that is superior for fire resistant properties, water pressure penetration and breathability (Ret).

  • Lightweight higher performance fabrics. The physical structure of the large diameter yarn creates “canals” of trapped air between this liner and the outershell and lining, which give a very high degree of insulation and breathability for the weight.
  • Why is this EOLINER moisture barrier better? Most products on the market have trapped air spaces created by dots of silicon rubber foam. The thick yarns in the EOLINER complex are not compressible and so retain their trapped air and insulation better under compression. Over the garment life, the thick yarn used in EOLINER is much better that that of a rubber foam, meaning as abrasion occurs between the outer shell and lining, the liner’s dimensions do not change.

INNER BODY LINING ADVANTAGES

This body liner is a woven high twist yarn comprising of a blend of Meta-Aramid, FR Viscose and antistatic fibre. The major advantage is that it is a very open weave with the viscose improving the next to skin moisture management.


We manufacture in Christchurch, New Zealand. Read more about New Zealand.

SKU: 111X

Measurement Process

All measurements are taken by the user pulling on a polycotton jacket and trouser demonstrator suit that matches the garment inner sizing and outer arm/leg length. Custom variations can be made to arm length and leg length in cm or inches, added or subtracted as required for wearer personal experience. Styx Mill can visit to assist with garment sizing, or courier a suitcase with all the sizing demonstrator garments.

Garment Support

All garments have an internal label including care instructions, re-certification dates, GS1 barcode, user name and serial number. Styx Mill has a standard warranty and an additional Lifetime Support warranty package, including free inspections, online records, free repairs and a garment trade programme.

Optional Extras

Chest badge with wearer name. | Ankle Debris guards on trousers. | Reflective prints to meet user requirements. | Braces for trousers. | Baton pockets for race suits. | Waist pleat customization for women's suits.

Repairs

All repairs are undertaken at our manufacturing base in Christchurch New Zealand

Material

Outer Shell: Series FX10 Kermal™ Fabric 98% aramid / 2% antistatic; 220g/m2 as a double faced weave, with the UV sensitive pararimid woven into the back

Moisture Barrier: Series FL12 Moisture Barrier Fabric 100% aramid non-woven laminated on ePTFE membrane 200g/m2.

Thermal Lining: Series FT10 Thermal Lining Fabric 98% aramid / 2% antistatic; 90g/m2